Material · FDM
PC Polycarbonate
Polycarbonate (PC) is a strong, impact-resistant engineering plastic (FDM). Suitable for protective covers, load-bearing parts and tooling.
Technical data
Properties by technology
Values from manufacturer datasheets. “To be confirmed” means the value is being checked against the manufacturer’s data; full details are in the PDF.
Tensile strength62 MPa
Elongation at break8 %
Tensile modulus2400 MPa
Flexural strength27 MPa
Service temperature (max)to be confirmed
Hardness (Shore)—
Production
- Technology
- Fused Deposition Modeling (FDM / FFF)
- Max. dimensions
- 300 × 200 × 200 mm
- Accuracy
- ±0.5 mm or ±0.5 %
- Min. wall
- 0.75 mm (locally down to 0.5 mm)
- Production time
- up to 7 business days · express up to 4
- Min. price
- €20 per part, orders from €40 (excl. VAT)
When to choose
A good fit when…
- you need high impact resistance and strength
- semi-transparent protective elements
When not to
Choose something else when…
- you need an easy-to-print, low-cost part – choose PETG
Note on data
The service temperature is being confirmed against the manufacturer datasheet – for your specific case, consult an engineer.
Parts
Parts by technology
