Material · SLA
Durable Resin
Durable resin is an impact- and wear-resistant SLA resin that behaves like polypropylene. Suitable for snap-fits, lids and parts that need to flex slightly.
Technical data
Properties by technology
Values from manufacturer datasheets. “To be confirmed” means the value is being checked against the manufacturer’s data; full details are in the PDF.
Tensile strength28 MPa
Elongation at break55 %
Tensile modulus660 MPa
Flexural strength24 MPa
Service temperature (max)41 °C
Hardness (Shore)—
Production
- Technology
- Stereolithography (SLA)
- Max. dimensions
- 254 × 254 × 330 mm
- Accuracy
- ±0.2 mm or ±0.2 %
- Min. wall
- 0.75 mm (locally down to 0.5 mm)
- Production time
- up to 5 business days · express up to 3
- Min. price
- €40 per part, orders from €80 (excl. VAT)
When to choose
A good fit when…
- you need SLA accuracy and surface finish with impact resistance
- snap-fits, lids, flexible latches
When not to
Choose something else when…
- you need high temperature resistance (service temperature – up to ~41 °C)
Properties
High elongation (per datasheet – ~55 %) – the part flexes without breaking. Colour: grey.
Parts
Parts by technology
