Material · SLA
Clear Resin
Clear resin is a transparent SLA photopolymer resin (~80 % transparency, with a slight haze). Suitable for visible internal channels, light guides, lens prototypes and visual models.
Technical data
Properties by technology
Values from manufacturer datasheets. “To be confirmed” means the value is being checked against the manufacturer’s data; full details are in the PDF.
Tensile strength65 MPa
Elongation at break6–12 %
Tensile modulus2800 MPa
Flexural strength42 MPa
Service temperature (max)70 °C
Hardness (Shore)—
Production
- Technology
- Stereolithography (SLA)
- Max. dimensions
- 145 × 145 × 145 mm
- Accuracy
- ±0.2 mm or ±0.2 %
- Min. wall
- 0.75 mm (locally down to 0.5 mm)
- Production time
- up to 5 business days · express up to 3
- Min. price
- €40 per part, orders from €80 (excl. VAT)
When to choose
A good fit when…
- you need to see inside – fluid channels, mechanisms
- light guides, lighting components
- smooth-surface visual models
When not to
Choose something else when…
- the part will be in sunlight for long periods – resins may yellow
- you need impact resistance – choose Tough or Durable
Design recommendations
Designing in Clear Resin
Walls
Minimum 0.75 mm; an even thickness is better for transparency.
Surfaces
Tell us which surfaces must be the clearest – we will place supports elsewhere.
Drainage
Hollow parts need openings to let resin escape.
Transparency
Without finishing, Clear resin is see-through with a slight haze. For higher clarity – hand polishing and clear coating (in the finishing section of the configurator). Maximum size – up to 145 × 145 × 145 mm.
Parts
Parts by technology
