Material · SLA
High Temp Resin
High Temp resin is an SLA resin for high temperatures (per datasheet – up to ~240 °C, low load). Suitable for moulds, hot air and fluid testing, and environments near heat sources.
Technical data
Properties by technology
Values from manufacturer datasheets. “To be confirmed” means the value is being checked against the manufacturer’s data; full details are in the PDF.
Tensile strength58 MPa
Elongation at break3 %
Tensile modulus2750 MPa
Flexural strength94 MPa
Service temperature (max)240 °C
Hardness (Shore)—
Production
- Technology
- Stereolithography (SLA)
- Max. dimensions
- 254 × 254 × 330 mm
- Accuracy
- ±0.2 mm or ±0.2 %
- Min. wall
- 0.75 mm (locally down to 0.5 mm)
- Production time
- up to 5 business days · express up to 3
- Min. price
- €40 per part, orders from €80 (excl. VAT)
When to choose
A good fit when…
- the part is tested with hot air or fluids
- moulds and inserts for short runs
- you need SLA accuracy at high temperatures
When not to
Choose something else when…
- the part will be exposed to impacts – the resin is brittle (elongation ~3 %)
Properties
High heat deflection temperature and stiffness, but low elongation – the part is brittle. Colour: semi-transparent, amber.
Parts
Parts by technology
